Products Help

Products

Please note that the colors of the lenses depicted in the illustrations may not truly reflect that of the items themselves. This is mainly due to the possible differences in lighting of the photography and differences in monitor settings for each individual. Actual lens diameter may contain error from 1mm~5mm. The enlargement effect do not represent the true diameter. All effect size and diameter are proclaimed by manufacturer/supplier, Momoiro Lens do not responsible for any error of the actual size for the lens. 

Below is an actual photo taken on the lenses for comparison when measured on different method. Overall the actual total diameter is from 14mm~15mm only.

Type of lenses used to measure:
1. iFairy Dolly+ Red 
Diameter: 16.2mm

2. TheDollyEye KiraKira Brown
Diameter: 16mm

3. LuxuryBabe 09 Pink
Diameter: 14.5mm, Enlargement effect: 16~17mm

4. LaWink Con Mini Black
Diameter: 15mm

Note: Diameter mentioned above was provided/proclaimed by the supplier.

Photo above: Graphic diameter measured when pressing the lens against the ruler surface. 

Photo above: Measured by putting the original curve lens on top of the ruler surface.

Product Label

Please note that product label may be varied from description due to different manufacturing & labeling process. Certain design are the same but distributed by different supplier hence the label may be different. Please be ensure as all products are guaranteed genuine and approved by FDA of origin distributor's country.

Contact Lens Guide

PERSONAL CLEANLINESS FOR LENS HANDLING AND INSERTION

1. Preparing The Lens For Wearing

It is essential that you learn and use good hygienic methods in the care and handling of your new lenses. Cleanliness is the first and most important aspect of proper contact lens care. In particular, your hands should be clean and free of any foreign substances when you handle your lenses.

The procedures are:

• Always wash your hands thoroughly with a mild soap, rinse completely, and dry with a lint-free towel before touching your lenses.
• Avoid the use of soaps containing cold cream, lotion, or oily cosmetics before handling your lenses, since these substances may come into contact with the lenses and interfere with successful wearing.
• Handle your lenses with your fingertips, and be careful to avoid contact with fingernails. It is helpful to keep your fingernails short and smooth.

Start off correctly by getting into the habit of always using proper hygienic procedures so that they become automatic.

2. Opening the Lens Package (Vial Bottle and Blister)

Vial Bottle Packaging

Please follow these simple steps:

Blister Packaging

To open an individual lens package, follow these simple steps:

1. Shake the lens package and check to see that the lens is floating in the solution.
2. Peel back the foil closure to reveal the lens. By stabilizing the lens package on the tabletop, you will minimize the possibility of a sudden splash.

Occasionally, a lens may adhere to the inside surface of the foil when opened, or to the plastic package itself. Same goes to vial bottle packaging. This will not affect the sterility of the lens. It is still perfectly safe to use. Carefully remove and inspect the lens following the handling instructions.

Note: Always start with the lens for your right eye. Making this a habit will help ensure that you always place the correct lens on the correct eye.

3. Handling the Lenses

• Develop the habit of always working with the same lens first to avoid mix ups.
• Remove the lens from its storage case and examine it to be sure that it is moist, clean, clear, and free of any nicks or tears. If the lens appears damaged, do not use it. 

Verify that the lens is not turned inside out by placing it on your forefinger and checking its profile. The lens should assume a natural, curved, bowl-like shape (refer image below). If the lens edges tend to point outward, the lens is inside out. Another method is to gently squeeze the lens between the thumb and forefinger. The edges should turn inward. If the lens is inside out, the edges will turn slightly outward.

4. Placing The Lens On The Eye

Remember, start with your right eye.

Once you have opened the lens package, removed and examined the lens, follow these steps to apply the lens to your eye:

1. Place the lens on the tip of your forefinger. BE SURE THE LENS IS CORRECTLY ORIENTED (see "Handling The Lenses").
2. Place the middle finger of the same hand close to your lower eyelashes and pull down the lower lid.
3. Use the forefinger or middle finger of the other hand to lift the upper lid.
4. Place the lens on the eye.
5. Gently release the lids and blink. The lens will center automatically.
6. Use the same technique when inserting the lens for your left eye.

Note: If you need to rinse the lenses before you insert it into your eye, use only fresh sterile saline solution. Never use tap water.

There are other methods of lens placement. If the above method is difficult for you, your eye care practitioner will provide you with an alternate method.

Note: If after placement of the lens, your vision is blurred, check for the following:

The lens is not centered on the eye (see "Centering the Lens").

If the lens is centered, remove the lens (see "Removing the Lens") and check for the following:

1. Cosmetics or oils on the lens. Dispose of the lens and insert a fresh new lens.
2. The lens is on the wrong eye.
3. The lens is inside-out (it would also not be as comfortable as normal).

If you find that your vision is still blurred after checking the above possibilities, remove both lenses and consult your eye care practitioner.

If a lens becomes less comfortable than when it was first inserted or if it is markedly uncomfortable upon insertion, remove the lens immediately and contact your eye care practitioner.

After you have successfully inserted your lenses, you should ask yourself:

How do the lenses feel on my eyes? How do my eyes look? Do I see well?

If your examination shows any problems IMMEDIATELY REMOVE YOUR LENSES AND CONTACT YOUR EYE CARE PRACTITIONER.

5. Centering The Lens

A lens which is on the cornea will very rarely be displaced onto the white part of the eye during wear. This, however, can occur if insertion and removal procedures are not performed properly. To center a lens, follow either of these procedures:

1. Close your eyelids and gently massage the lens into place through the closed lids OR
2. Gently manipulate the off-centered lens onto the cornea while the eye is opened, using finger pressure on the edge of the upper lid or lower lid.

6. Removing The Lens

Always remove the same lens first. Wash, rinse and dry your hands thoroughly.

CAUTION: Always be sure the lens is on the cornea before attempting to remove it. Determine this by covering the other eye. If vision is blurred, the lens is either on the white part of the eye or it is not on the eye at all. To locate the lens, inspect the upper area of the eye by looking down into a mirror while pulling the upper lid up. Then, inspect the lower area by pulling the lower lid down.

Method:

1. Look up, slide the lens to the lower part of the eye using the forefinger.
2. Gently pinch the lens between the thumb and forefinger.
3. Remove the lens.

Note: Pinching the lens between the thumb and forefinger is not harmful, provided the fingernails do not contact the lens. Some people find a mirror helpful when removing the lens.

After removing your lenses, please follow the required lens care procedures below.

CARING FOR YOUR LENSES

1. Basic Instructions

For continued safe and comfortable wearing of your lenses, it is important that you first clean and rinse, then disinfect your lenses after each removal, using the care regimen recommended by your eye care practitioner. Cleaning and rinsing are necessary to remove mucus, secretions, films or deposits which may have accumulated during wearing. The ideal time to clean your lenses is immediately after removing them. Disinfecting is necessary to destroy harmful germs.

You should adhere to a recommended care regimen. 

For safe contact lens wear, you should know and always practice your lens care routine:

• Always wash, rinse and dry hands before handling contact lenses.
• Always use fresh unexpired lens care solution.
• Use the recommended system of lens care, chemical (not heat), and carefully follow instructions on solution labeling. Different solutions cannot always be used together, and not all solutions are safe for use with all lenses. Do not alternate or mix lens care systems unless indicated on solution labeling.
• Always remove, clean, rinse and disinfect your lenses.
• Do not use saliva or anything other than the recommended solutions for lubricating or rewetting your lenses. Do not put lenses in your mouth.
• Lenses prescribed on the frequent replacement program should be thrown away after the recommended wearing period.
• Never rinse your lenses in water from the tap. There are two reasons for this:
  1. Tap water contains many impurities that can contaminate or damage your lenses and may lead to eye infection or injury.
  2. You might lose your lens down the drain.

Note: Some solutions may have more than one function, which will be indicated on the label. Read the label on the solution bottle and follow instructions.

• Clean one lens first (always the same lens first to avoid mixups), rinse the lens thoroughly with recommended saline or disinfecting solution to remove the cleaning solution, mucus and film from the lens surface. Follow the instructions provided in the cleaning solution labeling. Put that lens into the correct chamber of the lens storage case. Then repeat the procedure for the second lens.
• After cleaning, disinfect lenses using the system recommended by your eye care practitioner and/or the lens manufacturer. Follow the instructions provided in the disinfection solution labeling.
• To store lenses, disinfect and leave them in the closed/unopened case until ready to wear. If lenses are not to be used immediately following disinfection, you should consult the package insert or your eye care practitioner for information on storage of your lenses.
• Always keep your lenses completely immersed in a recommended disinfecting solution when the lenses are not being worn. If you discontinue wearing your lenses, but plan to begin wearing them again after a few weeks, ask your eye care practitioner for a recommendation on how to store your lenses.
• Contact Lenses cannot be heat (thermally) disinfected.
• After removing your lenses from the lens case, empty and rinse the lens storage case with solution(s) recommended by the lens case manufacturer; then allow the lens case to air dry. When the case is used again, refill it with fresh storage solution. Replace lens case at regular intervals.
• Your eye care practitioner may recommend a lubricating/rewetting solution for your use. Lubricating/rewetting solutions can be used to wet (lubricate) your lenses while you are wearing them to make them more comfortable.

2. Care For A Sticking (Non-moving) Lens

If a lens sticks (stops moving) on your eye, apply a few drops of the lubricating solution. You should wait until the lens begins to move freely on the eye before removing it. If non-movement of the lens continues, you should IMMEDIATELY consult your eye care practitioner.

3. Chemical (Not Heat) Disinfection

• Clean the contact lenses with a recommended cleaning solution and thoroughly rinse them with a recommended rinsing solution.
• After cleaning, to disinfect, carefully follow the instructions accompanying the disinfecting solution in the care regimen recommended by the lens manufacturer or the eye care practitioner.
• When using hydrogen peroxide lens care systems, lenses must be neutralized before wearing. Follow the recommendations on the hydrogen peroxide system labeling.
• Thoroughly rinse lenses with a fresh solution recommended for rinsing before inserting and wearing, or follow the instructions on the disinfection solution labeling.
• Do not heat the disinfection solution and lenses.
• Leave the lenses in the unopened storage case until ready to put on the eyes.

Caution: Lenses that are chemically disinfected may absorb ingredients from the disinfecting solution which may be irritating to the eyes. A thorough rinse in fresh sterile saline solution prior to placement on the eye should reduce the potential for irritation.

4. Lens Case Cleaning and Maintenance

Contact lens cases can be a source of bacteria growth. Lens cases should be emptied, cleaned, rinsed with multipurpose solution or saline solution and allowed to air dry. Lens cases should be replaced at regular intervals.

5. Care For A Dehydrated Lens

If a soft, hydrophilic contact lens is exposed to air while off the eye, it may become dry and brittle. If this happens, dispose of the lens and use a fresh new one.

6. Emergencies

If chemicals of any kind (household products, gardening solutions, laboratory chemicals, etc.) are splashed into your eyes: FLUSH EYES IMMEDIATELY WITH TAP WATER AND IMMEDIATELY CONTACT YOUR EYE CARE PRACTITIONER OR VISIT A HOSPITAL EMERGENCY ROOM WITHOUT DELAY.